[SN CIJ R079755] USED FENDER JAPAN (-2015) / MG69-72 Black Mustang [20]
This is a Fender Japan Mustang MG69-72, manufactured from 2004 to 2006.
This Mustang follows the '69 style, featuring a short scale, compact body, and elbow and back contours.
It features a basswood body, a maple neck, a round-inlaid rosewood fingerboard, a 305-scale length, two MG-SINGLE pickups, and a dynamic vibrato system.
The tuning machines have been replaced with Kluson Deluxe, and the saddle has been replaced with a stainless steel one.
The back of the body has paint cracks and dents, and the parts show some discoloration and rust.
There are scratches and small dents throughout the guitar.
Condition Grade: B+: Has some scratches but is suitable for normal use
Serial Number: R079755
Year of Manufacture: 2004–2006
Country of Manufacture: Japan
Case: Non-genuine soft case
Accessories: Arm
Weight: 3.34 kg
Truss Rod: No issues; rod movement tested up to 60 degrees left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 40.4 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 23.8 mm
Scale: 610 mm (24")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics (wiring repair)
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item, and it is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
This Mustang follows the '69 style, featuring a short scale, compact body, and elbow and back contours.
It features a basswood body, a maple neck, a round-inlaid rosewood fingerboard, a 305-scale length, two MG-SINGLE pickups, and a dynamic vibrato system.
The tuning machines have been replaced with Kluson Deluxe, and the saddle has been replaced with a stainless steel one.
The back of the body has paint cracks and dents, and the parts show some discoloration and rust.
There are scratches and small dents throughout the guitar.
Condition Grade: B+: Has some scratches but is suitable for normal use
Serial Number: R079755
Year of Manufacture: 2004–2006
Country of Manufacture: Japan
Case: Non-genuine soft case
Accessories: Arm
Weight: 3.34 kg
Truss Rod: No issues; rod movement tested up to 60 degrees left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 40.4 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 23.8 mm
Scale: 610 mm (24")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics (wiring repair)
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item, and it is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$1.97
Original: $5.63
-65%[SN CIJ R079755] USED FENDER JAPAN (-2015) / MG69-72 Black Mustang [20]—
$5.63
$1.97Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This is a Fender Japan Mustang MG69-72, manufactured from 2004 to 2006.
This Mustang follows the '69 style, featuring a short scale, compact body, and elbow and back contours.
It features a basswood body, a maple neck, a round-inlaid rosewood fingerboard, a 305-scale length, two MG-SINGLE pickups, and a dynamic vibrato system.
The tuning machines have been replaced with Kluson Deluxe, and the saddle has been replaced with a stainless steel one.
The back of the body has paint cracks and dents, and the parts show some discoloration and rust.
There are scratches and small dents throughout the guitar.
Condition Grade: B+: Has some scratches but is suitable for normal use
Serial Number: R079755
Year of Manufacture: 2004–2006
Country of Manufacture: Japan
Case: Non-genuine soft case
Accessories: Arm
Weight: 3.34 kg
Truss Rod: No issues; rod movement tested up to 60 degrees left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 40.4 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 23.8 mm
Scale: 610 mm (24")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics (wiring repair)
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item, and it is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
This Mustang follows the '69 style, featuring a short scale, compact body, and elbow and back contours.
It features a basswood body, a maple neck, a round-inlaid rosewood fingerboard, a 305-scale length, two MG-SINGLE pickups, and a dynamic vibrato system.
The tuning machines have been replaced with Kluson Deluxe, and the saddle has been replaced with a stainless steel one.
The back of the body has paint cracks and dents, and the parts show some discoloration and rust.
There are scratches and small dents throughout the guitar.
Condition Grade: B+: Has some scratches but is suitable for normal use
Serial Number: R079755
Year of Manufacture: 2004–2006
Country of Manufacture: Japan
Case: Non-genuine soft case
Accessories: Arm
Weight: 3.34 kg
Truss Rod: No issues; rod movement tested up to 60 degrees left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 40.4 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 23.8 mm
Scale: 610 mm (24")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics (wiring repair)
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item, and it is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
