[SN G897839] USED ORVILLE BY GIBSON / LPC Les Paul Custom White [20]
A brand that boasts enduring popularity thanks to its high quality—on par with Gibson itself—this 1989 Orville by Gibson features a cream-colored finish with a subtle, vintage-inspired light-faded white hue.
It is equipped with Gibson’s original “PCB pickups,” specifically the HB-L and HB-R models.
The neck shows signs of twisting and warping; although adjustments have been made through fret leveling, some buzzing may occur when played unamplified; however, the sound comes through the amp without any issues.
The original bridge was warped, so it has been replaced with a Gotoh GE103B-T.
The pickguard and truss rod cover have likely been replaced; although hidden, there are additional holes present.
There is a dent with paint chipping at the top of the headstock, and there are repairs for paint peeling and fingerboard delamination on the 6th-string side at the 1st fret.
There is an impact mark accompanied by paint cracking on the neck from the 10th to the 12th fret, and the clear coat on the binding on the 6th string side has peeled off.
There is paint peeling on the lower part of the body back and around the strap pins, and there are multiple dents accompanied by paint cracks and dents across the entire body.
The hardware shows signs of tarnish and rust, and there are minor dents and scratches throughout the instrument.
Condition Grade: B+: Some minor imperfections, but no issues for normal use
Serial Number: G897839
Year of Manufacture: 1988
Country of Manufacture: Japan
Case: Non-original gig bag
Weight: 4.10 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some twisting and waviness present)
Fret Wear: Within normal range; fret height is sufficient for playability
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.1 mm
Neck thickness near the 1st fret: 20.8 mm
Neck thickness near the 12th fret: 24.6 mm
Scale: 624 mm (24.56")
RADIUS: 254 mm (10")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fretting surface leveling, nut adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It is equipped with Gibson’s original “PCB pickups,” specifically the HB-L and HB-R models.
The neck shows signs of twisting and warping; although adjustments have been made through fret leveling, some buzzing may occur when played unamplified; however, the sound comes through the amp without any issues.
The original bridge was warped, so it has been replaced with a Gotoh GE103B-T.
The pickguard and truss rod cover have likely been replaced; although hidden, there are additional holes present.
There is a dent with paint chipping at the top of the headstock, and there are repairs for paint peeling and fingerboard delamination on the 6th-string side at the 1st fret.
There is an impact mark accompanied by paint cracking on the neck from the 10th to the 12th fret, and the clear coat on the binding on the 6th string side has peeled off.
There is paint peeling on the lower part of the body back and around the strap pins, and there are multiple dents accompanied by paint cracks and dents across the entire body.
The hardware shows signs of tarnish and rust, and there are minor dents and scratches throughout the instrument.
Condition Grade: B+: Some minor imperfections, but no issues for normal use
Serial Number: G897839
Year of Manufacture: 1988
Country of Manufacture: Japan
Case: Non-original gig bag
Weight: 4.10 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some twisting and waviness present)
Fret Wear: Within normal range; fret height is sufficient for playability
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.1 mm
Neck thickness near the 1st fret: 20.8 mm
Neck thickness near the 12th fret: 24.6 mm
Scale: 624 mm (24.56")
RADIUS: 254 mm (10")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fretting surface leveling, nut adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$3.21
Original: $9.16
-65%[SN G897839] USED ORVILLE BY GIBSON / LPC Les Paul Custom White [20]—
$9.16
$3.21Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A brand that boasts enduring popularity thanks to its high quality—on par with Gibson itself—this 1989 Orville by Gibson features a cream-colored finish with a subtle, vintage-inspired light-faded white hue.
It is equipped with Gibson’s original “PCB pickups,” specifically the HB-L and HB-R models.
The neck shows signs of twisting and warping; although adjustments have been made through fret leveling, some buzzing may occur when played unamplified; however, the sound comes through the amp without any issues.
The original bridge was warped, so it has been replaced with a Gotoh GE103B-T.
The pickguard and truss rod cover have likely been replaced; although hidden, there are additional holes present.
There is a dent with paint chipping at the top of the headstock, and there are repairs for paint peeling and fingerboard delamination on the 6th-string side at the 1st fret.
There is an impact mark accompanied by paint cracking on the neck from the 10th to the 12th fret, and the clear coat on the binding on the 6th string side has peeled off.
There is paint peeling on the lower part of the body back and around the strap pins, and there are multiple dents accompanied by paint cracks and dents across the entire body.
The hardware shows signs of tarnish and rust, and there are minor dents and scratches throughout the instrument.
Condition Grade: B+: Some minor imperfections, but no issues for normal use
Serial Number: G897839
Year of Manufacture: 1988
Country of Manufacture: Japan
Case: Non-original gig bag
Weight: 4.10 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some twisting and waviness present)
Fret Wear: Within normal range; fret height is sufficient for playability
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.1 mm
Neck thickness near the 1st fret: 20.8 mm
Neck thickness near the 12th fret: 24.6 mm
Scale: 624 mm (24.56")
RADIUS: 254 mm (10")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fretting surface leveling, nut adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It is equipped with Gibson’s original “PCB pickups,” specifically the HB-L and HB-R models.
The neck shows signs of twisting and warping; although adjustments have been made through fret leveling, some buzzing may occur when played unamplified; however, the sound comes through the amp without any issues.
The original bridge was warped, so it has been replaced with a Gotoh GE103B-T.
The pickguard and truss rod cover have likely been replaced; although hidden, there are additional holes present.
There is a dent with paint chipping at the top of the headstock, and there are repairs for paint peeling and fingerboard delamination on the 6th-string side at the 1st fret.
There is an impact mark accompanied by paint cracking on the neck from the 10th to the 12th fret, and the clear coat on the binding on the 6th string side has peeled off.
There is paint peeling on the lower part of the body back and around the strap pins, and there are multiple dents accompanied by paint cracks and dents across the entire body.
The hardware shows signs of tarnish and rust, and there are minor dents and scratches throughout the instrument.
Condition Grade: B+: Some minor imperfections, but no issues for normal use
Serial Number: G897839
Year of Manufacture: 1988
Country of Manufacture: Japan
Case: Non-original gig bag
Weight: 4.10 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some twisting and waviness present)
Fret Wear: Within normal range; fret height is sufficient for playability
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.1 mm
Neck thickness near the 1st fret: 20.8 mm
Neck thickness near the 12th fret: 24.6 mm
Scale: 624 mm (24.56")
RADIUS: 254 mm (10")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fretting surface leveling, nut adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
