[SN E81262] USED PRS SE / SE McCarty 594 Electric Guitar [20]
SE Series McCarty 594
The SE McCarty 594 was created, inspired by the sound of vintage guitars.
Equipped with two volume controls and two push/pull tone controls, it allows for seamless switching between humbucker and single-coil sounds.
This model is also characterized by the superb sustain provided by its slightly thicker, 24.594-inch scale Pattern Vintage neck with binding.
There are small dents accompanied by paint cracks in the center of the body back and the lower part of the body top, as well as a dent with a dent on the body side.
The parts show some dullness and fine rust, and there are overall scratches and small dents.
The inside of the included case has some fraying.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: CTI E81262
Year of Manufacture: 2022
Country of Manufacture: Indonesia
Case: Genuine soft case
Weight: 3.30 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees in both directions with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 22.9 mm
Neck thickness near the 12th fret: 25.0 mm
Scale: 624.68 mm (24.594")
RADIUS: 254 mm (10")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The SE McCarty 594 was created, inspired by the sound of vintage guitars.
Equipped with two volume controls and two push/pull tone controls, it allows for seamless switching between humbucker and single-coil sounds.
This model is also characterized by the superb sustain provided by its slightly thicker, 24.594-inch scale Pattern Vintage neck with binding.
There are small dents accompanied by paint cracks in the center of the body back and the lower part of the body top, as well as a dent with a dent on the body side.
The parts show some dullness and fine rust, and there are overall scratches and small dents.
The inside of the included case has some fraying.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: CTI E81262
Year of Manufacture: 2022
Country of Manufacture: Indonesia
Case: Genuine soft case
Weight: 3.30 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees in both directions with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 22.9 mm
Neck thickness near the 12th fret: 25.0 mm
Scale: 624.68 mm (24.594")
RADIUS: 254 mm (10")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$1.52
Original: $4.35
-65%[SN E81262] USED PRS SE / SE McCarty 594 Electric Guitar [20]—
$4.35
$1.52Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
SE Series McCarty 594
The SE McCarty 594 was created, inspired by the sound of vintage guitars.
Equipped with two volume controls and two push/pull tone controls, it allows for seamless switching between humbucker and single-coil sounds.
This model is also characterized by the superb sustain provided by its slightly thicker, 24.594-inch scale Pattern Vintage neck with binding.
There are small dents accompanied by paint cracks in the center of the body back and the lower part of the body top, as well as a dent with a dent on the body side.
The parts show some dullness and fine rust, and there are overall scratches and small dents.
The inside of the included case has some fraying.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: CTI E81262
Year of Manufacture: 2022
Country of Manufacture: Indonesia
Case: Genuine soft case
Weight: 3.30 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees in both directions with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 22.9 mm
Neck thickness near the 12th fret: 25.0 mm
Scale: 624.68 mm (24.594")
RADIUS: 254 mm (10")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The SE McCarty 594 was created, inspired by the sound of vintage guitars.
Equipped with two volume controls and two push/pull tone controls, it allows for seamless switching between humbucker and single-coil sounds.
This model is also characterized by the superb sustain provided by its slightly thicker, 24.594-inch scale Pattern Vintage neck with binding.
There are small dents accompanied by paint cracks in the center of the body back and the lower part of the body top, as well as a dent with a dent on the body side.
The parts show some dullness and fine rust, and there are overall scratches and small dents.
The inside of the included case has some fraying.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: CTI E81262
Year of Manufacture: 2022
Country of Manufacture: Indonesia
Case: Genuine soft case
Weight: 3.30 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees in both directions with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 22.9 mm
Neck thickness near the 12th fret: 25.0 mm
Scale: 624.68 mm (24.594")
RADIUS: 254 mm (10")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
