[SN V01344] USED FENDER USA / American Vintage 70s Stratocaster with Rosewood Fingerboard, Natural Finish [20]
A U.S.-made Stratocaster that faithfully recreates the unique specifications emblematic of 1970s Fender guitars
Featuring a striking large headstock, a three-point neck plate engraved with an “F,” a bullet nut that can be easily adjusted from the headstock side, and the modern logo emblematic of the ’70s, this model faithfully recreates the era.
This model is also notable for its three-point joint plate and the Micro-Tilt system, which allows for adjustment of the neck angle.
This Stratocaster from the American Vintage Series remains highly popular even after production has ended, thanks to its exceptional quality.
It is in good condition, with only minor scratches and small dents.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: V01344
Country of Manufacture: USA
Case: Genuine hard case
Accessories: Arm and bridge covers
Weight: 3.93 kg
Truss Rod: No issues; rod movement tested up to 60 degrees in both directions with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 42.4 mm
Neck thickness near the 1st fret: 22.0 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, string height, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the values will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Featuring a striking large headstock, a three-point neck plate engraved with an “F,” a bullet nut that can be easily adjusted from the headstock side, and the modern logo emblematic of the ’70s, this model faithfully recreates the era.
This model is also notable for its three-point joint plate and the Micro-Tilt system, which allows for adjustment of the neck angle.
This Stratocaster from the American Vintage Series remains highly popular even after production has ended, thanks to its exceptional quality.
It is in good condition, with only minor scratches and small dents.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: V01344
Country of Manufacture: USA
Case: Genuine hard case
Accessories: Arm and bridge covers
Weight: 3.93 kg
Truss Rod: No issues; rod movement tested up to 60 degrees in both directions with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 42.4 mm
Neck thickness near the 1st fret: 22.0 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, string height, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the values will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$9.56
[SN V01344] USED FENDER USA / American Vintage 70s Stratocaster with Rosewood Fingerboard, Natural Finish [20]—
$9.56
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A U.S.-made Stratocaster that faithfully recreates the unique specifications emblematic of 1970s Fender guitars
Featuring a striking large headstock, a three-point neck plate engraved with an “F,” a bullet nut that can be easily adjusted from the headstock side, and the modern logo emblematic of the ’70s, this model faithfully recreates the era.
This model is also notable for its three-point joint plate and the Micro-Tilt system, which allows for adjustment of the neck angle.
This Stratocaster from the American Vintage Series remains highly popular even after production has ended, thanks to its exceptional quality.
It is in good condition, with only minor scratches and small dents.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: V01344
Country of Manufacture: USA
Case: Genuine hard case
Accessories: Arm and bridge covers
Weight: 3.93 kg
Truss Rod: No issues; rod movement tested up to 60 degrees in both directions with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 42.4 mm
Neck thickness near the 1st fret: 22.0 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, string height, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the values will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Featuring a striking large headstock, a three-point neck plate engraved with an “F,” a bullet nut that can be easily adjusted from the headstock side, and the modern logo emblematic of the ’70s, this model faithfully recreates the era.
This model is also notable for its three-point joint plate and the Micro-Tilt system, which allows for adjustment of the neck angle.
This Stratocaster from the American Vintage Series remains highly popular even after production has ended, thanks to its exceptional quality.
It is in good condition, with only minor scratches and small dents.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: V01344
Country of Manufacture: USA
Case: Genuine hard case
Accessories: Arm and bridge covers
Weight: 3.93 kg
Truss Rod: No issues; rod movement tested up to 60 degrees in both directions with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 42.4 mm
Neck thickness near the 1st fret: 22.0 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, string height, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the values will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
