[SN F0807862] USED Ibanez / SV5470F Natural Blue [12]
The Prestige-grade SV5470F, manufactured by Fujigen, has arrived.
The S Series features a center section with the same thickness as the RG series, while achieving an astonishingly slim profile toward the sides.
It features a flamed maple top and mahogany back and sides, a 5-piece maple/walnut neck, and a 24-fret rosewood fingerboard.
Like the body, the neck is finished with an extremely thin profile, ensuring it reliably keeps up with even the most technical playing styles.
It is equipped with the original synchroniZR bridge, which uses bearings to minimize friction to the absolute minimum, delivering unparalleled smoothness during whammy bar use.
The tuning machines are equipped with a feature that automatically cuts the strings as they are wound, making this a model packed with practical features.
There are numerous small and large dents scattered across the body top, along with fine scratches throughout the body, and the hardware shows some tarnish.
The topcoat of the finish has yellowed slightly, and the color of the body top has faded somewhat.
There are signs of repair on several cracks on the back panel, and some areas are chipped.
Although it shows signs of use, it has been fully maintained and cleaned by our repair center, and playability is good.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Serial Number: F0807862
Year of Manufacture: 2008
Country of Manufacture: Japan
Case: Genuine hard case
Accessories: Arm
Weight: 3.23 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 43.6 mm
Neck thickness near the 1st fret: 18.3 mm
Neck thickness near the 12th fret: 20.6 mm
Scale: 648 mm (25.5")
Radius: 305 mm (12")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string action were measured by our staff during setup; these values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The S Series features a center section with the same thickness as the RG series, while achieving an astonishingly slim profile toward the sides.
It features a flamed maple top and mahogany back and sides, a 5-piece maple/walnut neck, and a 24-fret rosewood fingerboard.
Like the body, the neck is finished with an extremely thin profile, ensuring it reliably keeps up with even the most technical playing styles.
It is equipped with the original synchroniZR bridge, which uses bearings to minimize friction to the absolute minimum, delivering unparalleled smoothness during whammy bar use.
The tuning machines are equipped with a feature that automatically cuts the strings as they are wound, making this a model packed with practical features.
There are numerous small and large dents scattered across the body top, along with fine scratches throughout the body, and the hardware shows some tarnish.
The topcoat of the finish has yellowed slightly, and the color of the body top has faded somewhat.
There are signs of repair on several cracks on the back panel, and some areas are chipped.
Although it shows signs of use, it has been fully maintained and cleaned by our repair center, and playability is good.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Serial Number: F0807862
Year of Manufacture: 2008
Country of Manufacture: Japan
Case: Genuine hard case
Accessories: Arm
Weight: 3.23 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 43.6 mm
Neck thickness near the 1st fret: 18.3 mm
Neck thickness near the 12th fret: 20.6 mm
Scale: 648 mm (25.5")
Radius: 305 mm (12")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string action were measured by our staff during setup; these values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$1.97
Original: $5.63
-65%[SN F0807862] USED Ibanez / SV5470F Natural Blue [12]—
$5.63
$1.97Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Prestige-grade SV5470F, manufactured by Fujigen, has arrived.
The S Series features a center section with the same thickness as the RG series, while achieving an astonishingly slim profile toward the sides.
It features a flamed maple top and mahogany back and sides, a 5-piece maple/walnut neck, and a 24-fret rosewood fingerboard.
Like the body, the neck is finished with an extremely thin profile, ensuring it reliably keeps up with even the most technical playing styles.
It is equipped with the original synchroniZR bridge, which uses bearings to minimize friction to the absolute minimum, delivering unparalleled smoothness during whammy bar use.
The tuning machines are equipped with a feature that automatically cuts the strings as they are wound, making this a model packed with practical features.
There are numerous small and large dents scattered across the body top, along with fine scratches throughout the body, and the hardware shows some tarnish.
The topcoat of the finish has yellowed slightly, and the color of the body top has faded somewhat.
There are signs of repair on several cracks on the back panel, and some areas are chipped.
Although it shows signs of use, it has been fully maintained and cleaned by our repair center, and playability is good.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Serial Number: F0807862
Year of Manufacture: 2008
Country of Manufacture: Japan
Case: Genuine hard case
Accessories: Arm
Weight: 3.23 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 43.6 mm
Neck thickness near the 1st fret: 18.3 mm
Neck thickness near the 12th fret: 20.6 mm
Scale: 648 mm (25.5")
Radius: 305 mm (12")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string action were measured by our staff during setup; these values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The S Series features a center section with the same thickness as the RG series, while achieving an astonishingly slim profile toward the sides.
It features a flamed maple top and mahogany back and sides, a 5-piece maple/walnut neck, and a 24-fret rosewood fingerboard.
Like the body, the neck is finished with an extremely thin profile, ensuring it reliably keeps up with even the most technical playing styles.
It is equipped with the original synchroniZR bridge, which uses bearings to minimize friction to the absolute minimum, delivering unparalleled smoothness during whammy bar use.
The tuning machines are equipped with a feature that automatically cuts the strings as they are wound, making this a model packed with practical features.
There are numerous small and large dents scattered across the body top, along with fine scratches throughout the body, and the hardware shows some tarnish.
The topcoat of the finish has yellowed slightly, and the color of the body top has faded somewhat.
There are signs of repair on several cracks on the back panel, and some areas are chipped.
Although it shows signs of use, it has been fully maintained and cleaned by our repair center, and playability is good.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Serial Number: F0807862
Year of Manufacture: 2008
Country of Manufacture: Japan
Case: Genuine hard case
Accessories: Arm
Weight: 3.23 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 43.6 mm
Neck thickness near the 1st fret: 18.3 mm
Neck thickness near the 12th fret: 20.6 mm
Scale: 648 mm (25.5")
Radius: 305 mm (12")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string action were measured by our staff during setup; these values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
