USED Edwards / E-EX-110E Stain Nevada Brown [12]
The Edwards EX model has arrived!
It features a mahogany body and is equipped with EMG-81 pickups.
It features a satin finish, reminiscent of the guitar favored by the lead singer and guitarist of a certain thrash metal band.
Since it’s equipped with EMG pickups, it handles distortion well and is a perfect fit for heavy sounds.
Since the battery inside the cavity wasn’t secured, we’ve installed a piece of foam to hold it in place.
The screw holes on the back panel were stripped, so we’ve repaired them.
There are scattered minor scratches and dents throughout the body, and the hardware shows some signs of wear.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Case: Genuine soft case
Weight: 3.04 kg
Truss Rod: Tested to 60 degrees in both directions; no issues found
Remaining Fret Height: Fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 20.4 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 628 mm (24.75")
RADIUS: 305 mm (12")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, repair of one back panel screw hole, installation of foam padding inside the cavity
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup; these values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the values will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It features a mahogany body and is equipped with EMG-81 pickups.
It features a satin finish, reminiscent of the guitar favored by the lead singer and guitarist of a certain thrash metal band.
Since it’s equipped with EMG pickups, it handles distortion well and is a perfect fit for heavy sounds.
Since the battery inside the cavity wasn’t secured, we’ve installed a piece of foam to hold it in place.
The screw holes on the back panel were stripped, so we’ve repaired them.
There are scattered minor scratches and dents throughout the body, and the hardware shows some signs of wear.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Case: Genuine soft case
Weight: 3.04 kg
Truss Rod: Tested to 60 degrees in both directions; no issues found
Remaining Fret Height: Fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 20.4 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 628 mm (24.75")
RADIUS: 305 mm (12")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, repair of one back panel screw hole, installation of foam padding inside the cavity
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup; these values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the values will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$3.35
Original: $9.56
-65%USED Edwards / E-EX-110E Stain Nevada Brown [12]—
$9.56
$3.35Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Edwards EX model has arrived!
It features a mahogany body and is equipped with EMG-81 pickups.
It features a satin finish, reminiscent of the guitar favored by the lead singer and guitarist of a certain thrash metal band.
Since it’s equipped with EMG pickups, it handles distortion well and is a perfect fit for heavy sounds.
Since the battery inside the cavity wasn’t secured, we’ve installed a piece of foam to hold it in place.
The screw holes on the back panel were stripped, so we’ve repaired them.
There are scattered minor scratches and dents throughout the body, and the hardware shows some signs of wear.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Case: Genuine soft case
Weight: 3.04 kg
Truss Rod: Tested to 60 degrees in both directions; no issues found
Remaining Fret Height: Fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 20.4 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 628 mm (24.75")
RADIUS: 305 mm (12")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, repair of one back panel screw hole, installation of foam padding inside the cavity
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup; these values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the values will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It features a mahogany body and is equipped with EMG-81 pickups.
It features a satin finish, reminiscent of the guitar favored by the lead singer and guitarist of a certain thrash metal band.
Since it’s equipped with EMG pickups, it handles distortion well and is a perfect fit for heavy sounds.
Since the battery inside the cavity wasn’t secured, we’ve installed a piece of foam to hold it in place.
The screw holes on the back panel were stripped, so we’ve repaired them.
There are scattered minor scratches and dents throughout the body, and the hardware shows some signs of wear.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Case: Genuine soft case
Weight: 3.04 kg
Truss Rod: Tested to 60 degrees in both directions; no issues found
Remaining Fret Height: Fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 20.4 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 628 mm (24.75")
RADIUS: 305 mm (12")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, repair of one back panel screw hole, installation of foam padding inside the cavity
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup; these values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the values will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
