[SN 93693] USED SCHECTER / ST-TYPE Red Sunburst [12]
We’ve just received a Schecter ST-style guitar featuring a beautiful bird’s-eye maple neck.
While the brand now offers a wide range of guitars, including metal-oriented models, this particular model strongly reflects the company’s original identity as a component guitar manufacturer.
Featuring an ash body with a bird's-eye maple neck and ebony fingerboard, it boasts a 16-inch fingerboard radius and slightly wider frets.
The pickups are believed to be Schecter’s original Monster Tone, characterized by large pole pieces that deliver power rivaling that of a humbucker.
Although it is a traditional ST-style guitar, this model incorporates practical specifications without compromise, such as tuning pegs with different post heights on the low- and high-string sides for tension adjustment, and a brass bridge saddle for high vibration efficiency.
There are numerous scratches and dents scattered throughout the body, and the hardware shows signs of tarnish and peeling plating.
The pickup cavity beneath the pickguard has been hand-enlarged and coated with conductive paint.
The strap pins have been replaced with Jim Dunlop locking pins, and the original strap hardware is included.
While it shows signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
The tremolo arm is missing, and several pieces of duct tape have been applied to the exterior of the included hard case.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 93693
Case: Non-original hard case
Accessories: Lock pin
Weight: 3.66 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 20.2 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 648mm (25.5")
Radius: 406mm (16")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
While the brand now offers a wide range of guitars, including metal-oriented models, this particular model strongly reflects the company’s original identity as a component guitar manufacturer.
Featuring an ash body with a bird's-eye maple neck and ebony fingerboard, it boasts a 16-inch fingerboard radius and slightly wider frets.
The pickups are believed to be Schecter’s original Monster Tone, characterized by large pole pieces that deliver power rivaling that of a humbucker.
Although it is a traditional ST-style guitar, this model incorporates practical specifications without compromise, such as tuning pegs with different post heights on the low- and high-string sides for tension adjustment, and a brass bridge saddle for high vibration efficiency.
There are numerous scratches and dents scattered throughout the body, and the hardware shows signs of tarnish and peeling plating.
The pickup cavity beneath the pickguard has been hand-enlarged and coated with conductive paint.
The strap pins have been replaced with Jim Dunlop locking pins, and the original strap hardware is included.
While it shows signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
The tremolo arm is missing, and several pieces of duct tape have been applied to the exterior of the included hard case.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 93693
Case: Non-original hard case
Accessories: Lock pin
Weight: 3.66 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 20.2 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 648mm (25.5")
Radius: 406mm (16")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$1.64
Original: $4.68
-65%[SN 93693] USED SCHECTER / ST-TYPE Red Sunburst [12]—
$4.68
$1.64Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
We’ve just received a Schecter ST-style guitar featuring a beautiful bird’s-eye maple neck.
While the brand now offers a wide range of guitars, including metal-oriented models, this particular model strongly reflects the company’s original identity as a component guitar manufacturer.
Featuring an ash body with a bird's-eye maple neck and ebony fingerboard, it boasts a 16-inch fingerboard radius and slightly wider frets.
The pickups are believed to be Schecter’s original Monster Tone, characterized by large pole pieces that deliver power rivaling that of a humbucker.
Although it is a traditional ST-style guitar, this model incorporates practical specifications without compromise, such as tuning pegs with different post heights on the low- and high-string sides for tension adjustment, and a brass bridge saddle for high vibration efficiency.
There are numerous scratches and dents scattered throughout the body, and the hardware shows signs of tarnish and peeling plating.
The pickup cavity beneath the pickguard has been hand-enlarged and coated with conductive paint.
The strap pins have been replaced with Jim Dunlop locking pins, and the original strap hardware is included.
While it shows signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
The tremolo arm is missing, and several pieces of duct tape have been applied to the exterior of the included hard case.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 93693
Case: Non-original hard case
Accessories: Lock pin
Weight: 3.66 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 20.2 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 648mm (25.5")
Radius: 406mm (16")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
While the brand now offers a wide range of guitars, including metal-oriented models, this particular model strongly reflects the company’s original identity as a component guitar manufacturer.
Featuring an ash body with a bird's-eye maple neck and ebony fingerboard, it boasts a 16-inch fingerboard radius and slightly wider frets.
The pickups are believed to be Schecter’s original Monster Tone, characterized by large pole pieces that deliver power rivaling that of a humbucker.
Although it is a traditional ST-style guitar, this model incorporates practical specifications without compromise, such as tuning pegs with different post heights on the low- and high-string sides for tension adjustment, and a brass bridge saddle for high vibration efficiency.
There are numerous scratches and dents scattered throughout the body, and the hardware shows signs of tarnish and peeling plating.
The pickup cavity beneath the pickguard has been hand-enlarged and coated with conductive paint.
The strap pins have been replaced with Jim Dunlop locking pins, and the original strap hardware is included.
While it shows signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
The tremolo arm is missing, and several pieces of duct tape have been applied to the exterior of the included hard case.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 93693
Case: Non-original hard case
Accessories: Lock pin
Weight: 3.66 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 20.2 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 648mm (25.5")
Radius: 406mm (16")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
