[SN 011211] USED Epiphone / Les Paul Custom LPC-80 Ebony [12]
A Japanese-made Epiphone Les Paul Custom has arrived.
Part of the LPC series, which was produced exclusively for the Japanese market from 1998 to 2002, this is the LPC-80 featuring a rosewood fingerboard.
Like the Gibson Les Paul Custom reissued in 1968, it features a body construction with a maple top and back, and a mahogany neck with a rosewood fingerboard, set into the body with a long tenon.
It features a headstock designed to match the Gibson model, a truss rod cover engraved with “GIBSON,” and an ABR-1-style bridge, faithfully reproducing the look and specifications of the original.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish and plating wear.
Although the truss rod is fully tightened, the neck is currently in good condition, with no loose frets or muffled notes.
Although it shows some signs of use, it has been fully serviced and cleaned at our repair center—including pot and escutcheon replacements—and offers excellent playability.
The included hard case has numerous sticker marks, and one of the hinges is defective; it has been temporarily repaired by threading a wire through it. This does not interfere with opening or closing the case.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: 011211
Year of Manufacture: 2000
Country of Manufacture: Japan
Case: Hard Case
Weight: 4.23 kg
Truss Rod: At maximum adjustment; no current issues with the neck
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 24.5 mm
Scale: 628 mm (24.75")
Radius: 305 mm (12")
Strings at Setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Part of the LPC series, which was produced exclusively for the Japanese market from 1998 to 2002, this is the LPC-80 featuring a rosewood fingerboard.
Like the Gibson Les Paul Custom reissued in 1968, it features a body construction with a maple top and back, and a mahogany neck with a rosewood fingerboard, set into the body with a long tenon.
It features a headstock designed to match the Gibson model, a truss rod cover engraved with “GIBSON,” and an ABR-1-style bridge, faithfully reproducing the look and specifications of the original.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish and plating wear.
Although the truss rod is fully tightened, the neck is currently in good condition, with no loose frets or muffled notes.
Although it shows some signs of use, it has been fully serviced and cleaned at our repair center—including pot and escutcheon replacements—and offers excellent playability.
The included hard case has numerous sticker marks, and one of the hinges is defective; it has been temporarily repaired by threading a wire through it. This does not interfere with opening or closing the case.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: 011211
Year of Manufacture: 2000
Country of Manufacture: Japan
Case: Hard Case
Weight: 4.23 kg
Truss Rod: At maximum adjustment; no current issues with the neck
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 24.5 mm
Scale: 628 mm (24.75")
Radius: 305 mm (12")
Strings at Setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$2.09
Original: $5.98
-65%[SN 011211] USED Epiphone / Les Paul Custom LPC-80 Ebony [12]—
$5.98
$2.09Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A Japanese-made Epiphone Les Paul Custom has arrived.
Part of the LPC series, which was produced exclusively for the Japanese market from 1998 to 2002, this is the LPC-80 featuring a rosewood fingerboard.
Like the Gibson Les Paul Custom reissued in 1968, it features a body construction with a maple top and back, and a mahogany neck with a rosewood fingerboard, set into the body with a long tenon.
It features a headstock designed to match the Gibson model, a truss rod cover engraved with “GIBSON,” and an ABR-1-style bridge, faithfully reproducing the look and specifications of the original.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish and plating wear.
Although the truss rod is fully tightened, the neck is currently in good condition, with no loose frets or muffled notes.
Although it shows some signs of use, it has been fully serviced and cleaned at our repair center—including pot and escutcheon replacements—and offers excellent playability.
The included hard case has numerous sticker marks, and one of the hinges is defective; it has been temporarily repaired by threading a wire through it. This does not interfere with opening or closing the case.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: 011211
Year of Manufacture: 2000
Country of Manufacture: Japan
Case: Hard Case
Weight: 4.23 kg
Truss Rod: At maximum adjustment; no current issues with the neck
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 24.5 mm
Scale: 628 mm (24.75")
Radius: 305 mm (12")
Strings at Setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Part of the LPC series, which was produced exclusively for the Japanese market from 1998 to 2002, this is the LPC-80 featuring a rosewood fingerboard.
Like the Gibson Les Paul Custom reissued in 1968, it features a body construction with a maple top and back, and a mahogany neck with a rosewood fingerboard, set into the body with a long tenon.
It features a headstock designed to match the Gibson model, a truss rod cover engraved with “GIBSON,” and an ABR-1-style bridge, faithfully reproducing the look and specifications of the original.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish and plating wear.
Although the truss rod is fully tightened, the neck is currently in good condition, with no loose frets or muffled notes.
Although it shows some signs of use, it has been fully serviced and cleaned at our repair center—including pot and escutcheon replacements—and offers excellent playability.
The included hard case has numerous sticker marks, and one of the hinges is defective; it has been temporarily repaired by threading a wire through it. This does not interfere with opening or closing the case.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: 011211
Year of Manufacture: 2000
Country of Manufacture: Japan
Case: Hard Case
Weight: 4.23 kg
Truss Rod: At maximum adjustment; no current issues with the neck
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 24.5 mm
Scale: 628 mm (24.75")
Radius: 305 mm (12")
Strings at Setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
