[SN 1188] USED YAMAHA / SX-800B Black [11]
The YAMAHA “SX-800B” has arrived!
A model from the Japanese-made “SX Series,” produced from 1976 to 1979.
The SX-800B model features three single-coil pickups and silver-colored hardware.
It features a maple top and cedar back, a maple neck, and an ebony fingerboard.
Equipped with one volume and two tone controls, plus a 5-way pickup selector, it lets you enjoy a wide range of Stratocaster-like sounds.
With its unique double-cutaway shape and set-neck construction, this is a distinctive guitar that embodies the spirit of Yamaha from that era.
There are signs of wear, such as scratches and dents, throughout the instrument.
Signs of aging, such as rust and tarnish, are visible on the metal parts.
The pickguard shows signs of warping.
Overall, there is fading, discoloration, and cloudiness.
Because the area between the front and middle pickups is slightly raised, the first string may come into contact with it during aggressive picking or depending on your playing position, which can cause a muffled sound.
The neck shows some waviness, resulting in slight buzzing, but this does not interfere with normal use.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Serial Number: 1188
Year of Manufacture: 1976
Country of Manufacture: Japan
Case: Non-original soft case
Accessories: None
Weight: 3.73 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (slight waviness present)
Remaining Fret Height: No issues; sufficient fret height
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 41.0 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 25.6 mm
Scale: 648 mm (25.5")
RADIUS: 356 mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Modifications: Replacement of tone control pot and input jack
Repair and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, fret deburring, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
A model from the Japanese-made “SX Series,” produced from 1976 to 1979.
The SX-800B model features three single-coil pickups and silver-colored hardware.
It features a maple top and cedar back, a maple neck, and an ebony fingerboard.
Equipped with one volume and two tone controls, plus a 5-way pickup selector, it lets you enjoy a wide range of Stratocaster-like sounds.
With its unique double-cutaway shape and set-neck construction, this is a distinctive guitar that embodies the spirit of Yamaha from that era.
There are signs of wear, such as scratches and dents, throughout the instrument.
Signs of aging, such as rust and tarnish, are visible on the metal parts.
The pickguard shows signs of warping.
Overall, there is fading, discoloration, and cloudiness.
Because the area between the front and middle pickups is slightly raised, the first string may come into contact with it during aggressive picking or depending on your playing position, which can cause a muffled sound.
The neck shows some waviness, resulting in slight buzzing, but this does not interfere with normal use.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Serial Number: 1188
Year of Manufacture: 1976
Country of Manufacture: Japan
Case: Non-original soft case
Accessories: None
Weight: 3.73 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (slight waviness present)
Remaining Fret Height: No issues; sufficient fret height
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 41.0 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 25.6 mm
Scale: 648 mm (25.5")
RADIUS: 356 mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Modifications: Replacement of tone control pot and input jack
Repair and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, fret deburring, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
$1.66
Original: $4.75
-65%[SN 1188] USED YAMAHA / SX-800B Black [11]—
$4.75
$1.66Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The YAMAHA “SX-800B” has arrived!
A model from the Japanese-made “SX Series,” produced from 1976 to 1979.
The SX-800B model features three single-coil pickups and silver-colored hardware.
It features a maple top and cedar back, a maple neck, and an ebony fingerboard.
Equipped with one volume and two tone controls, plus a 5-way pickup selector, it lets you enjoy a wide range of Stratocaster-like sounds.
With its unique double-cutaway shape and set-neck construction, this is a distinctive guitar that embodies the spirit of Yamaha from that era.
There are signs of wear, such as scratches and dents, throughout the instrument.
Signs of aging, such as rust and tarnish, are visible on the metal parts.
The pickguard shows signs of warping.
Overall, there is fading, discoloration, and cloudiness.
Because the area between the front and middle pickups is slightly raised, the first string may come into contact with it during aggressive picking or depending on your playing position, which can cause a muffled sound.
The neck shows some waviness, resulting in slight buzzing, but this does not interfere with normal use.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Serial Number: 1188
Year of Manufacture: 1976
Country of Manufacture: Japan
Case: Non-original soft case
Accessories: None
Weight: 3.73 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (slight waviness present)
Remaining Fret Height: No issues; sufficient fret height
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 41.0 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 25.6 mm
Scale: 648 mm (25.5")
RADIUS: 356 mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Modifications: Replacement of tone control pot and input jack
Repair and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, fret deburring, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
A model from the Japanese-made “SX Series,” produced from 1976 to 1979.
The SX-800B model features three single-coil pickups and silver-colored hardware.
It features a maple top and cedar back, a maple neck, and an ebony fingerboard.
Equipped with one volume and two tone controls, plus a 5-way pickup selector, it lets you enjoy a wide range of Stratocaster-like sounds.
With its unique double-cutaway shape and set-neck construction, this is a distinctive guitar that embodies the spirit of Yamaha from that era.
There are signs of wear, such as scratches and dents, throughout the instrument.
Signs of aging, such as rust and tarnish, are visible on the metal parts.
The pickguard shows signs of warping.
Overall, there is fading, discoloration, and cloudiness.
Because the area between the front and middle pickups is slightly raised, the first string may come into contact with it during aggressive picking or depending on your playing position, which can cause a muffled sound.
The neck shows some waviness, resulting in slight buzzing, but this does not interfere with normal use.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Serial Number: 1188
Year of Manufacture: 1976
Country of Manufacture: Japan
Case: Non-original soft case
Accessories: None
Weight: 3.73 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (slight waviness present)
Remaining Fret Height: No issues; sufficient fret height
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 41.0 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 25.6 mm
Scale: 648 mm (25.5")
RADIUS: 356 mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Modifications: Replacement of tone control pot and input jack
Repair and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, fret deburring, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.
