[SN CIJ N092972] USED Fender Japan / JB62-70 3-Tone Sunburst [10]
A used Fender Japan '60s Jazz Bass has arrived!
The capacitors were replaced with Bumble Bee types upon arrival.
The truss rod has limited adjustment remaining in the tightening direction. The body and neck show scattered signs of wear, including scuff marks and dents accompanied by paint chipping. While the hardware shows signs of deterioration such as tarnish and rust, there are currently no functional issues.
Condition Grade: B: Shows significant scratches and signs of wear, but is suitable for normal use
Serial Number: CIJ N092972
Country of Manufacture: Japan
Case: Hard case
Weight: 4.35 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some play remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.5 mm at the 12th fret
String action (treble side): 2.0 mm at the 12th fret
Nut width: 38.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 24.3 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at setup: D'Addario EXL165 / .045-.105 set
Modifications: Capacitor replacement (Bumble Bee)
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling
Other: There is limited remaining travel on the truss rod. The body and neck show scattered signs of wear, including scuffs and dents accompanied by paint chipping. While the hardware shows signs of aging such as tarnish and rust, there are currently no functional issues.
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret height, string action, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The capacitors were replaced with Bumble Bee types upon arrival.
The truss rod has limited adjustment remaining in the tightening direction. The body and neck show scattered signs of wear, including scuff marks and dents accompanied by paint chipping. While the hardware shows signs of deterioration such as tarnish and rust, there are currently no functional issues.
Condition Grade: B: Shows significant scratches and signs of wear, but is suitable for normal use
Serial Number: CIJ N092972
Country of Manufacture: Japan
Case: Hard case
Weight: 4.35 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some play remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.5 mm at the 12th fret
String action (treble side): 2.0 mm at the 12th fret
Nut width: 38.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 24.3 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at setup: D'Addario EXL165 / .045-.105 set
Modifications: Capacitor replacement (Bumble Bee)
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling
Other: There is limited remaining travel on the truss rod. The body and neck show scattered signs of wear, including scuffs and dents accompanied by paint chipping. While the hardware shows signs of aging such as tarnish and rust, there are currently no functional issues.
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret height, string action, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$1.64
Original: $4.68
-65%[SN CIJ N092972] USED Fender Japan / JB62-70 3-Tone Sunburst [10]—
$4.68
$1.64Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A used Fender Japan '60s Jazz Bass has arrived!
The capacitors were replaced with Bumble Bee types upon arrival.
The truss rod has limited adjustment remaining in the tightening direction. The body and neck show scattered signs of wear, including scuff marks and dents accompanied by paint chipping. While the hardware shows signs of deterioration such as tarnish and rust, there are currently no functional issues.
Condition Grade: B: Shows significant scratches and signs of wear, but is suitable for normal use
Serial Number: CIJ N092972
Country of Manufacture: Japan
Case: Hard case
Weight: 4.35 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some play remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.5 mm at the 12th fret
String action (treble side): 2.0 mm at the 12th fret
Nut width: 38.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 24.3 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at setup: D'Addario EXL165 / .045-.105 set
Modifications: Capacitor replacement (Bumble Bee)
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling
Other: There is limited remaining travel on the truss rod. The body and neck show scattered signs of wear, including scuffs and dents accompanied by paint chipping. While the hardware shows signs of aging such as tarnish and rust, there are currently no functional issues.
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret height, string action, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The capacitors were replaced with Bumble Bee types upon arrival.
The truss rod has limited adjustment remaining in the tightening direction. The body and neck show scattered signs of wear, including scuff marks and dents accompanied by paint chipping. While the hardware shows signs of deterioration such as tarnish and rust, there are currently no functional issues.
Condition Grade: B: Shows significant scratches and signs of wear, but is suitable for normal use
Serial Number: CIJ N092972
Country of Manufacture: Japan
Case: Hard case
Weight: 4.35 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some play remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.5 mm at the 12th fret
String action (treble side): 2.0 mm at the 12th fret
Nut width: 38.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 24.3 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at setup: D'Addario EXL165 / .045-.105 set
Modifications: Capacitor replacement (Bumble Bee)
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling
Other: There is limited remaining travel on the truss rod. The body and neck show scattered signs of wear, including scuffs and dents accompanied by paint chipping. While the hardware shows signs of aging such as tarnish and rust, there are currently no functional issues.
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret height, string action, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
