[SN MX18058932] USED FENDER MEXICO / Road Worn '60s Stratocaster Olympic White [06]
A used Road Worn 60s Stratocaster featuring the "WORN" finish—which even replicates discoloration and rust on the parts—has arrived.
It features an alder body, maple neck, and pearwood fingerboard. The finish is nitrocellulose lacquer. It is equipped with “TEX-MEX” pickups. It features modern specifications within its vintage look.
A crack in the fingerboard is visible near the 1st fret. In addition to the "WORN" finish, there are scattered dents on the body that were added later. There is also a prominent, deep scuff mark extending toward the endpin (which has caused a dent in the body), giving the guitar a heavily used appearance.
It has been adjusted and cleaned at our repair center, and there are no issues with its playability.
Condition Grade: B: Shows significant scratches and signs of wear, but is suitable for normal use
Serial Number: MX18058932
Country of Manufacture: Mexico
Case: Soft case
Accessories: Tonearm
Weight: 3.35 kg
Truss Rod: No issues; rod movement tested up to 60 degrees left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It features an alder body, maple neck, and pearwood fingerboard. The finish is nitrocellulose lacquer. It is equipped with “TEX-MEX” pickups. It features modern specifications within its vintage look.
A crack in the fingerboard is visible near the 1st fret. In addition to the "WORN" finish, there are scattered dents on the body that were added later. There is also a prominent, deep scuff mark extending toward the endpin (which has caused a dent in the body), giving the guitar a heavily used appearance.
It has been adjusted and cleaned at our repair center, and there are no issues with its playability.
Condition Grade: B: Shows significant scratches and signs of wear, but is suitable for normal use
Serial Number: MX18058932
Country of Manufacture: Mexico
Case: Soft case
Accessories: Tonearm
Weight: 3.35 kg
Truss Rod: No issues; rod movement tested up to 60 degrees left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$2.51
Original: $7.17
-65%[SN MX18058932] USED FENDER MEXICO / Road Worn '60s Stratocaster Olympic White [06]—
$7.17
$2.51Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A used Road Worn 60s Stratocaster featuring the "WORN" finish—which even replicates discoloration and rust on the parts—has arrived.
It features an alder body, maple neck, and pearwood fingerboard. The finish is nitrocellulose lacquer. It is equipped with “TEX-MEX” pickups. It features modern specifications within its vintage look.
A crack in the fingerboard is visible near the 1st fret. In addition to the "WORN" finish, there are scattered dents on the body that were added later. There is also a prominent, deep scuff mark extending toward the endpin (which has caused a dent in the body), giving the guitar a heavily used appearance.
It has been adjusted and cleaned at our repair center, and there are no issues with its playability.
Condition Grade: B: Shows significant scratches and signs of wear, but is suitable for normal use
Serial Number: MX18058932
Country of Manufacture: Mexico
Case: Soft case
Accessories: Tonearm
Weight: 3.35 kg
Truss Rod: No issues; rod movement tested up to 60 degrees left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It features an alder body, maple neck, and pearwood fingerboard. The finish is nitrocellulose lacquer. It is equipped with “TEX-MEX” pickups. It features modern specifications within its vintage look.
A crack in the fingerboard is visible near the 1st fret. In addition to the "WORN" finish, there are scattered dents on the body that were added later. There is also a prominent, deep scuff mark extending toward the endpin (which has caused a dent in the body), giving the guitar a heavily used appearance.
It has been adjusted and cleaned at our repair center, and there are no issues with its playability.
Condition Grade: B: Shows significant scratches and signs of wear, but is suitable for normal use
Serial Number: MX18058932
Country of Manufacture: Mexico
Case: Soft case
Accessories: Tonearm
Weight: 3.35 kg
Truss Rod: No issues; rod movement tested up to 60 degrees left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
