[SN S1321103] USED ESP / SNAPPER-AL Black [06]
We've received a used ESP / SNAPPER-AL!
The SNAPPER is one of our standard-style models.
It features an alder body, a hard maple neck, and a rosewood fingerboard.
It’s equipped with the original pickups in an SSH configuration.
It is equipped with a mix variation switch that changes the selected pickups in the mix position from “Neck + Middle” to “Neck + Middle + Bridge Split,” and from “Middle + Bridge” to “Neck + Bridge.”
The master tone control uses a pot with a switch, and capacitors with different values—0.047 μF and 0.01 μF—are installed.
You can switch between them with a single push of the knob; when pushed up, the 0.01 μF capacitor is selected, producing a mild tone.
There are linear scratches on the top of the body, scuff marks on the sides of the body and near the jack, and buckle marks and dents on the back of the body. There are also several dents visible on the headstock.
While there are other minor scratches, dents, and some tarnish on the metal parts, this is still a guitar that is perfectly playable.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: S1321103
Country of Manufacture: Japan
Case: Hard case
Accessories: Arm
Weight: 3.34 kg
Truss Rod: No issues; rod movement up to 60 degrees to the left and right has been confirmed with no problems
Fret Wear: Note: While the frets can still withstand filing, they are on the low side
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Scale: 648 mm (25.5")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fretting surface leveling, pickguard replacement, nut slot adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The SNAPPER is one of our standard-style models.
It features an alder body, a hard maple neck, and a rosewood fingerboard.
It’s equipped with the original pickups in an SSH configuration.
It is equipped with a mix variation switch that changes the selected pickups in the mix position from “Neck + Middle” to “Neck + Middle + Bridge Split,” and from “Middle + Bridge” to “Neck + Bridge.”
The master tone control uses a pot with a switch, and capacitors with different values—0.047 μF and 0.01 μF—are installed.
You can switch between them with a single push of the knob; when pushed up, the 0.01 μF capacitor is selected, producing a mild tone.
There are linear scratches on the top of the body, scuff marks on the sides of the body and near the jack, and buckle marks and dents on the back of the body. There are also several dents visible on the headstock.
While there are other minor scratches, dents, and some tarnish on the metal parts, this is still a guitar that is perfectly playable.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: S1321103
Country of Manufacture: Japan
Case: Hard case
Accessories: Arm
Weight: 3.34 kg
Truss Rod: No issues; rod movement up to 60 degrees to the left and right has been confirmed with no problems
Fret Wear: Note: While the frets can still withstand filing, they are on the low side
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Scale: 648 mm (25.5")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fretting surface leveling, pickguard replacement, nut slot adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$2.38
Original: $6.81
-65%[SN S1321103] USED ESP / SNAPPER-AL Black [06]—
$6.81
$2.38Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
We've received a used ESP / SNAPPER-AL!
The SNAPPER is one of our standard-style models.
It features an alder body, a hard maple neck, and a rosewood fingerboard.
It’s equipped with the original pickups in an SSH configuration.
It is equipped with a mix variation switch that changes the selected pickups in the mix position from “Neck + Middle” to “Neck + Middle + Bridge Split,” and from “Middle + Bridge” to “Neck + Bridge.”
The master tone control uses a pot with a switch, and capacitors with different values—0.047 μF and 0.01 μF—are installed.
You can switch between them with a single push of the knob; when pushed up, the 0.01 μF capacitor is selected, producing a mild tone.
There are linear scratches on the top of the body, scuff marks on the sides of the body and near the jack, and buckle marks and dents on the back of the body. There are also several dents visible on the headstock.
While there are other minor scratches, dents, and some tarnish on the metal parts, this is still a guitar that is perfectly playable.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: S1321103
Country of Manufacture: Japan
Case: Hard case
Accessories: Arm
Weight: 3.34 kg
Truss Rod: No issues; rod movement up to 60 degrees to the left and right has been confirmed with no problems
Fret Wear: Note: While the frets can still withstand filing, they are on the low side
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Scale: 648 mm (25.5")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fretting surface leveling, pickguard replacement, nut slot adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The SNAPPER is one of our standard-style models.
It features an alder body, a hard maple neck, and a rosewood fingerboard.
It’s equipped with the original pickups in an SSH configuration.
It is equipped with a mix variation switch that changes the selected pickups in the mix position from “Neck + Middle” to “Neck + Middle + Bridge Split,” and from “Middle + Bridge” to “Neck + Bridge.”
The master tone control uses a pot with a switch, and capacitors with different values—0.047 μF and 0.01 μF—are installed.
You can switch between them with a single push of the knob; when pushed up, the 0.01 μF capacitor is selected, producing a mild tone.
There are linear scratches on the top of the body, scuff marks on the sides of the body and near the jack, and buckle marks and dents on the back of the body. There are also several dents visible on the headstock.
While there are other minor scratches, dents, and some tarnish on the metal parts, this is still a guitar that is perfectly playable.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: S1321103
Country of Manufacture: Japan
Case: Hard case
Accessories: Arm
Weight: 3.34 kg
Truss Rod: No issues; rod movement up to 60 degrees to the left and right has been confirmed with no problems
Fret Wear: Note: While the frets can still withstand filing, they are on the low side
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Scale: 648 mm (25.5")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fretting surface leveling, pickguard replacement, nut slot adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
